User Tools

Site Tools


howto:3d_model_particles

3D model particles

3D models can be used as particles in a particle generator. There are two things that need to be done. In the particle generator definition, set the particle stage's type to one of the pt_model flags. The following would make the stage use particle model number 13:

Type = "pt_model13";

In the particle stage definition, remember to set a color for the stage. If the color is not specified, the default values will result in a completely transparent particle model.

The model definition must have a matching ID. For example, particle model number 13 uses the following ID:

ID = "Particle13";

See also

howto/3d_model_particles.txt · Last modified: 2017-03-19 20:31 by skyjake